fbpx Skip to content

Cylinder Return Instructions

The information below is provided to instruct CryoTouch, CryoTouch MD, and CryoLab users how to package and return their empty Carbon Dioxide cylinders. Also included are safety measures to keep in mind about the product. Finally, the contact information is shown below in case there is ever an emergency related to the product.

Emergency Response Information

INFOTRAC USA: +1-800-535-5053

Customer Service: 1-855-355-CRYO (2796)

How to return your EMPTY CO2 Cylinder

Customer Service: 1-855-355-CRYO (2796)

INSIDE THE US: Please return your empty cylinders to CryoConcepts

1. Retrieve the cylinder return box provided with your CryoTouch® MD treatment kit.

2. Place the cylinder inside the box and seal it with shipping tape.

3. Give the box to Federal Express on their next visit or drop it into your local Federal Express Box.

OUTSIDE THE US: Please contact your local distributor for options to return the empty cylinder.

Safety Measures and Precautions
Protect from sunlight. Store in a well-ventilated place.
Protective Measures
Put on appropriate personal protective equipment (see Section 8). Contains gas under pressure. Contains refrigerated gas. Avoid breathing gas. Do not puncture or incinerate container. Use equipment rated for cylinder pressure. Close valve after each use and when empty. Protect cylinders from physical damage; do not drag, roll, slide, or drop. Use a suitable hand truck for cylinder movement. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue and can be hazardous.
Advice on General Occupational Hygiene
Eating, drinking, and smoking should be prohibited in areas where this material is handled, stored, and processed. Workers should wash hands and face before eating, drinking, and smoking. Remove contaminated clothing and protective equipment before entering eating areas. See also Section 8 for additional information on hygiene measures.
Any Incompatibilities
Approved area. Store in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10). Cylinders should be stored upright, with valve protection cap in place, and firmly secured to prevent falling or being knocked over. Cylinder temperatures should not exceed 52°C (125°F). Keep container tightly closed and sealed until ready for use. See Section 10 for incompatible materials before handling or use.